Glass Particle Removal Settling Tanks
June 23rd, 2011 by
admin
Bearing in Mind Flow Rate, Detention Time and Removal Rates Can Make For a Successful Glass Particle Removal Settling Tank Design
Settling tanks remove base matter from water. Glass particle removal, in particular, may be difficult for systems using a settling tank to accomplish because fine bits may evade the settling process instituted by such a tank. This is because glass particles may be nearly, or exactly, as light as their carrying water.
Nonetheless, systems incorporating settling tanks can be successful at glass particle removal.
Properly designed glass particle removal settling tanks must take into account the matter they are removing and the wear and tear they are apt to withstand. For example, metal is strong but corrosive, while plastic is less strong, but non-corrosive.
Settling tanks must be long enough and wide enough to hold fluid for reasonable detention periods. Without this acceptable quiescent phase elements will not settle to the bottom.
Proper sizing of glass particle removal tanks also ensures water passes at a low rate of speed, one that prevents turbulence. Turbulence, which is caused by excess water pressure and velocity, will also prevent sediment from settling. To keep such turbulence to a minimum, tanks should be deep enough to keep layers of detritus separate from the topmost and cleaner layers.
Once a layer of sludge or non-fluid base matter is resolved from its cleaner components—in the case of glass particle removal, liquid can be treated with a aggregate-causing chemical, or flocculent, allowing finer bits to adhere to sediment—it is crucial to remove the lower layer of sediment-ridden matter, or slurry, expeditiously. An overflow system that continuously tips the water into further tanks, for further cleaning, or valves that purge the unclean slurry into a disposal unit may accomplish this removal.
By implementing needful design elements, specifically recalling rate of water speed, detention time and quick removal, settling tanks designed for glass particle removal can be eminently successful.
Posted in Reference and Education |
Comments Off